CW V7.2 PE生成无线串口程序不成功，求大神！

491965376

程序如下：
void main(void)
{
  /* Write your local variable definition here */
  /*** Processor Expert internal initialization. DON'T REMOVE THIS CODE!!! ***/
  PE_low_level_init();
  /*** End of Processor Expert internal initialization.                    ***/
for(;;)
{
AS1_SendChar('H');
AS1_SendChar('E');
AS1_SendChar('L');
AS1_SendChar('L');
AS1_SendChar('O');
}
  /* Write your code here */
  /* For example: for(;;) { } */
  /*** Don't write any code pass this line, or it will be deleted during code generation. ***/
  /*** Processor Expert end of main routine. DON'T MODIFY THIS CODE!!! ***/
  for(;;){}
  /*** Processor Expert end of main routine. DON'T WRITE CODE BELOW!!! ***/
} /*** End of main routine. DO NOT MODIFY THIS TEXT!!! ***/

串口AS1是由PE自动生成的，但是发送出来的数据就是乱码如下：
00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 E0 E0 00 E0 E0 E0 00 E0 E0 E0 00 E0 E0 E0 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 E0 00 E0 E0 00 E0 E0 00 E0 E0 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 E0 E0 00 E0 E0 E0 00 E0 E0 E0 00 E0 E0 E0 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 E0 00 E0 E0 00 E0 E0 00 E0 E0 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 E0 E0 00 E0 E0 E0 00 E0 E0 E0 00 E0 E0 E0 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 E0 00 E0 E0 00 E0 E0 00 E0 E0 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 E0 E0 00 E0 E0 E0 00 E0 E0 E0 00 E0 E0 E0 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 E0 00 E0 E0 00 E0 E0 00 E0 E0 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0 00 00 E0
波特率什么的都是正确的，有没有相同问题的，急用呀，搞了几天了，做不下去了！

xinmengwangran

这么高的版本啊！

glan

可能因为波特率太高了，试试19200