protues NOKIA 1100的仿真资料

zhen

protues NOKIA 1100的仿真资料

代码过长发一部分，看看有需要的吗

/*-----------------------------------------------------*/

/*-F--NOKIA1100 display image;

/*-M--Debug_*p--- "image[][]";

/*-----------------------------------------------------*/

//void Lcd1100_display_image(uint16 *s)

/*-----------------------------------------------------*/

/*-F--NOKIA1100 linedraw ;

/*-M--Debug_*p--- "image[][]";

/*-----------------------------------------------------*/

/*-----------------------------------------------------*/

/*-F--NOKIA1100 initialization;

/*-----------------------------------------------------*/

void Init_lcd1100(void)

{

RST = 0;

_delay_ms(100);            // 5mS so says the stop watch(less than 5ms will not work)

RST = 1;

Lcd1100_write_byte(CMD,0x20); // write VOP register

Lcd1100_write_byte(CMD,0x90);

Lcd1100_write_byte(CMD,0xA4); // all on/normal display

Lcd1100_write_byte(CMD,0x2F); // Power control set(charge pump on/off)

Lcd1100_write_byte(CMD,0x40); // set start row address = 0

Lcd1100_write_byte(CMD,0xB0); // set Y-address = 0

Lcd1100_write_byte(CMD,0x10); // set X-address, upper 3 bits

Lcd1100_write_byte(CMD,0x00);  // set X-address, lower 4 bits

Lcd1100_write_byte(CMD,0xC0); // NO mirror Y axis (about X axis)

Lcd1100_write_byte(CMD,0xA0); // NO Invert screen in horizontal axis

Lcd1100_write_byte(CMD,0xAC); // set initial row (R0) of the display

Lcd1100_write_byte(CMD,0x00);

Lcd1100_write_byte(CMD,0xAF); // display ON/OFF

Lcd1100_clear(); // clear LCD

Lcd1100_write_byte(CMD,0xA6); // normal display (non inverted)

_delay_ms(10);

}

仿真源码下载：protues nokia1100仿真代码

http://yunfile.com/file/zhengoogle/e6c87878/

再见蔚蓝海岸

看不懂？有深度

夜之音

LZ我顶你顶的不行不行滴！！！很好很好！！！！

c164811818

帅！