IAR烧程序跑飞了？完全懵逼······

小车爱好

Sat Apr 02, 2016 14:01:41: Loaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.0\arm\config\debugger\Freescale\Trace_Kxx.dmac
Sat Apr 02, 2016 14:01:41: JLINK command: ProjectFile = E:\资料大全\OLED\landzoK60CCD3.0-----oled\landzoK60CCD3.0-----oled\build\fire_demo\settings\fire_demo_Release.jlink, return = 0
Sat Apr 02, 2016 14:01:41: Device "MK60DN512XXX10" selected (512 KB flash, 128 KB RAM).
Sat Apr 02, 2016 14:01:41: DLL version: V4.80g, compiled Feb 13 2014 20:50:02
Sat Apr 02, 2016 14:01:41: Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46
Sat Apr 02, 2016 14:01:41: Selecting SWD as current target interface.
Sat Apr 02, 2016 14:01:41: JTAG speed is initially set to: 32 kHz
Sat Apr 02, 2016 14:01:41: Found SWD-DP with ID 0x2BA01477
Sat Apr 02, 2016 14:01:41: Found SWD-DP with ID 0x2BA01477
Sat Apr 02, 2016 14:01:41: Found Cortex-M4 r0p0, Little endian.
Sat Apr 02, 2016 14:01:41: FPUnit: 6 code (BP) slots and 2 literal slots
Sat Apr 02, 2016 14:01:41: TPIU fitted.
Sat Apr 02, 2016 14:01:41: ETM fitted.
Sat Apr 02, 2016 14:01:41: ETB present.
Sat Apr 02, 2016 14:01:41: CSTF present.
Sat Apr 02, 2016 14:01:42: Hardware reset with strategy 0 was performed
Sat Apr 02, 2016 14:01:42: Initial reset was performed
Sat Apr 02, 2016 14:01:42: J-Link: Flash download: Flash download into internal flash skipped. Flash contents already match
Sat Apr 02, 2016 14:01:42: 10868 bytes downloaded (56.76 Kbytes/sec)
Sat Apr 02, 2016 14:01:42: Loaded debugee: E:\资料大全\OLED\landzoK60CCD3.0-----oled\landzoK60CCD3.0-----oled\build\fire_demo\Release\Exe\fire_gpio_demo.out
Sat Apr 02, 2016 14:01:42: Hardware reset with strategy 0 was performed
Sat Apr 02, 2016 14:01:42: Target reset
咋回事啊，别的程序都没问题，就它是个这