智能车制作

标题: 求助 [打印本页]

作者: 007你若成风 时间: 2015-1-19 20:47
标题: 求助
K60如何配置A15输出PWM啊？求指教，谢谢

作者: 六步上篮 时间: 2015-1-19 21:05
额用库啊

作者: 007你若成风 时间: 2015-1-19 22:36

六步上篮发表于 2015-1-19 21:05
额用库啊

//选择并开启通道
  switch(channel)
  {
case 0:
case 1:
case 2:
case 3:
   SIM_SCGC5 |= SIM_SCGC5_PORTC_MASK;
   PORT_PCR_REG(PORTC_BASE_PTR, channel+1) = PORT_PCR_MUX(4);
   break;
case 4:
case 5:
case 6:
case 7:
   SIM_SCGC5 |= SIM_SCGC5_PORTD_MASK;
   PORT_PCR_REG(PORTD_BASE_PTR, channel) = PORT_PCR_MUX(4);
   break;
default:
   return 0;
  }

channel - PWM输出通道
*    |__0--PTC1
*    |__1--PTC2
*    |__2--PTC3
*    |__3--PTC4
*    |__4--PTD4
*    |__5--PTD5
*    |__6--PTD6
*    |__7--PTD7
* duty - PWM输出占空比
*    |__0~10000--占空比0.00%~100.00%

#define SIM_SCGC5_LPTIMER_MASK                0x1u
#define SIM_SCGC5_LPTIMER_SHIFT                0
#define SIM_SCGC5_REGFILE_MASK                0x2u
#define SIM_SCGC5_REGFILE_SHIFT                1
#define SIM_SCGC5_TSI_MASK                      0x20u
#define SIM_SCGC5_TSI_SHIFT                   5
#define SIM_SCGC5_PORTA_MASK                   0x200u
#define SIM_SCGC5_PORTA_SHIFT                   9
#define SIM_SCGC5_PORTB_MASK                   0x400u
#define SIM_SCGC5_PORTB_SHIFT                   10
#define SIM_SCGC5_PORTC_MASK                   0x800u
#define SIM_SCGC5_PORTC_SHIFT                   11
#define SIM_SCGC5_PORTD_MASK                   0x1000u
#define SIM_SCGC5_PORTD_SHIFT                   12
#define SIM_SCGC5_PORTE_MASK                   0x2000u
#define SIM_SCGC5_PORTE_SHIFT                   13

#define SIM_SCGC5_PORTD_MASK                   0x1000u//  貌似这里配置PD7

怎么配置成A15 ？我做个呼吸灯效果

欢迎光临智能车制作 (http://111.231.132.190/)