标题: 自己做得板子 两个个可以用 三个遇到这种情况 什么原因 [打印本页] 作者: hqzzzz 时间: 2014-12-5 23:23 标题: 自己做得板子 两个个可以用 三个遇到这种情况 什么原因 [attach]72276[/attach]
寄存器 fill with zero 到80% 就报错，，求救 作者: hqzzzz 时间: 2014-12-5 23:29
忘了说芯片 MK64Fx512作者: hqzzzz 时间: 2014-12-5 23:54
Connecting ...
- Connecting via USB to J-Link device 0
- J-Link firmware: V1.20 (J-Link ARM V8 compiled Nov 28 2014 13:44:46)
- Target interface speed: 2000 kHz (Auto)
- Initializing CPU core (Init sequence) ...
- Executing Reset (0, 0 ms)
- Initialized successfully
- Target interface speed: 2000 kHz (Auto)
- Connected successfully
Erasing chip ...
- Erasing 160 sectors, 2 ranges, 0x0 - 0x7FFFF, 0x10000000 - 0x1001FFFF
- RAM tested O.K.
- Erasing bank 0, sector 0
- Erase operation completed successfully - Completed after 1.327 sec
Filling with zero ...
- 160 of 160 sectors selected, 2 ranges, 0x0 - 0x7FFFF, 0x10000000 - 0x1001FFFF
- RAM tested O.K.
- ERROR: Can not read register 15 (R15) while CPU is running
- ERROR: Can not read register 7 (R7) while CPU is running
- ERROR: Can not read register 6 (R6) while CPU is running
- ERROR: Can not read register 5 (R5) while CPU is running
- ERROR: Can not read register 4 (R4) while CPU is running
- ERROR: Can not read register 3 (R3) while CPU is running
- ERROR: Can not read register 2 (R2) while CPU is running
- ERROR: Can not read register 1 (R1) while CPU is running
- ERROR: Can not read register 0 (R0) while CPU is running
- ERROR: Can not read register 15 (R15) while CPU is running
- ERROR: PC of target system has unexpected value after programming. (PC = 0x00000000)!
---------------------------------------------------------------------- Registers -------------------------------------------------------------------------------------
PC = 00000000
Current: R0 = 00000000, R1 = 00000000, R2 = 00000000, R3 = 00000000
R4 = 00000000, R5 = 00000000, R6 = 00000000, R7 = 00000000
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- ERROR: Failed to fill with zero作者: 1200 时间: 2014-12-6 09:46
求代码啊作者: zcz0426 时间: 2015-12-28 13:45
我也遇到和你一样的问题，现在也不懂怎么解决啊！！！作者: JEANFF 时间: 2016-12-22 09:43
我也遇到类似问题，但是有一块相同的板子是可以用的，另一块板子在经过电源反接之后烧了很多东西，修复了之后就一直报错这个问题，初步怀疑是pcb板子内部短路之类的
